辽宁瓦房店金刚石矿床50号岩管地质特征及找矿预测     

刘礼广  吴大天 《中国地质调查》2020,7(5):33-41

以辽宁瓦房店金刚石矿床50号岩管为例,系统分析了该矿床的地质特征。通过对斑状富金云母金伯利岩、含围岩角砾斑状金伯利岩和金伯利凝灰角砾岩进行岩石地球化学分析发现: 碳酸盐化金伯利凝灰角砾岩超基性成分较少,滑石化、蛇纹石化及碳酸盐化混合金伯利凝灰角砾岩超基性成分较多; 铬、镍、钛在金伯利凝灰角砾岩中的含量较低,在含围岩角砾斑状金云母金伯利岩中的含量略高,在斑状富金云母金伯利岩和斑状金伯利岩中的含量最高。该矿床主要为含围岩角砾斑状金伯利岩和斑状富金云母金伯利岩,其次为金伯利凝灰角砾岩、含围岩角砾斑状金云母金伯利岩和含金伯利物质角砾岩。含铬镁铝榴石、铬铁矿和碳硅石是金刚石的伴生矿物。水平方向上,金伯利岩含矿品位西部较富,东部较贫; 垂直方向上,金伯利岩含矿品位变化较小。通过三维建模,推测50号岩管不是根部相,而是受EW向推覆构造作用影响发生的断层错位,在其东侧600 m深处存在50-1号金伯利岩体。  相似文献   

PDR算法对地磁室内定位精度的提升研究     

黄鹤  张新宇  仇凯悦 《测绘通报》2019,(12):18-21

利用建筑物中金属结构引起的地磁场扰动可以对室内的行人目标进行定位，而且基于地磁场的定位无需布设任何额外设施，因此可以以低成本实现定位。但仅靠单一的地磁技术无法满足室内定位的精度要求。为了解决磁场数据中单点定位的模糊性问题，本文提出了一种利用粒子滤波算法将PDR与地磁相融合的室内定位方法，并开发了地磁室内导航系统，以智能手机为硬件平台构建磁力计传感器模型，建立匹配轨迹的均方误差准则并实现PDR累积误差实时校正的迭代计算。在68 m×1.8 m的试验区域内，产生的平均定位误差为1.13 m，最大定位误差为2.17 m。本文算法的定位精度比单独PDR算法提升了42%；与单一地磁指纹匹配算法相比，定位精度提高了57%。试验证明，本文提出的融合算法对提高室内定位精度具有显著的作用。  相似文献   

改进分数阶达尔文粒子群的多Renyi熵图像分割算法     

袁玉珠 《测绘通报》2019,(6):34-40

针对智能优化图像分割算法易陷入局部最优、分割精度不高等问题，本文融合改进的分数阶达尔文粒子群算法和二维Renyi熵多阈值，提出了一种新的多阈值遥感图像分割算法。算法利用粒子自身进化信息来定义进化因子，结合进化因子并利用高斯图函数调整分数阶次α系数以实现精确计算和快速收敛；根据局部最优概率因子对局部最优位置进行Levy飞行随机扰动以提高算法跳出局部最优的能力；同时将二维Renyi熵单阈值扩展到多阈值分割上，并结合改进的分数阶达尔文粒子群算法，将二维Renyi熵多阈值应用于遥感图像分割中。仿真结果表明，与其他2种智能优化分割算法相比，本文分割算法在细节处理和分割精度上均有明显优势，在PRI上至少提升7.27%、VOI至少降低6.5%、GCE至少降低10.4%。  相似文献   

顾及有色噪声的自适应粒子滤波UWB定位算法     

张园  谭兴龙  赵长胜  李晓明 《测绘通报》2019,(8):30-33

传统卡尔曼滤波算法要求噪声模型符合高斯分布，在UWB室内定位中，由于载体本身的机制等干扰，观测噪声不仅仅是白噪声，也存在有色噪声的情况，而粒子滤波可以处理有色噪声的问题。本文通过增加似然分布自适应调整来改进粒子滤波用于目标跟踪的精度，同时研究在白噪声、有色噪声下似然分布自适应调整粒子滤波和拓展卡尔曼滤波在UWB中的优势与不同。试验结果表明：观测噪声为白噪声时，拓展卡尔曼滤波和粒子滤波均可以较好地实现对行人的定位跟踪；观测噪声为有色噪声时，自适应粒子滤波定位效果优于粒子滤波、拓展卡尔曼滤波。  相似文献   

机载LiDAR技术支持下的荒漠地区1:10 000地形图测绘与研究——以内蒙古阿拉善地区为例     

王志明  李锁乐 《测绘通报》2019,(4):91-95

尝试应用机载LiDAR技术测绘1：10 000比例尺地形图3D（DLG、DEM、DOM）产品，给出了机载LiDAR测绘3D产品的技术流程，并选择荒漠地区作为试验区，验证了此种技术方法在荒漠地区测绘3D产品的可行性，分析了成果精度。试验证明，该方法可以满足荒漠区域的1：10 000比例尺3D基础数据生产要求，且具有外业工作量小、自动化程度高、成图快、高程精度高、受外界环境影响小等优点，同时也总结了该方法中有待完善之处。该方法为荒漠地区3D基础测绘数据获取提供了有益借鉴。  相似文献   

Indoor localization for pedestrians with real-time capability using multi-sensor smartphones     

Catia Real Ehrlich 《地球空间信息科学学报》2019,22(2):73-88

ABSTRACT

The localization of persons or objects usually refers to a position determined in a spatial reference system. Outdoors, this is usually accomplished with Global Navigation Satellite Systems (GNSS). However, the automatic positioning of people in GNSS-free environments, especially inside of buildings (indoors) poses a huge challenge. Indoors, satellite signals are attenuated, shielded or reflected by building components (e.g. walls or ceilings). For selected applications, the automatic indoor positioning is possible based on different technologies (e.g. WiFi, RFID, or UWB). However, a standard solution is still not available. Many indoor positioning systems are only suitable for specific applications or are deployed under certain conditions, e.g. additional infrastructures or sensor technologies. Smartphones, as popular cost-effective multi-sensor systems, is a promising indoor localization platform for the mass-market and is increasingly coming into focus. Today’s devices are equipped with a variety of sensors that can be used for indoor positioning. In this contribution, an approach to smartphone-based pedestrian indoor localization is presented. The novelty of this approach refers to a holistic, real-time pedestrian localization inside of buildings based on multi-sensor smartphones and easy-to-install local positioning systems. For this purpose, the barometric altitude is estimated in order to derive the floor on which the user is located. The 2D position is determined subsequently using the principle of pedestrian dead reckoning based on user's movements extracted from the smartphone sensors. In order to minimize the strong error accumulation in the localization caused by various sensor errors, additional information is integrated into the position estimation. The building model is used to identify permissible (e.g. rooms, passageways) and impermissible (e.g. walls) building areas for the pedestrian. Several technologies contributing to higher precision and robustness are also included. For the fusion of different linear and non-linear data, an advanced algorithm based on the Sequential Monte Carlo method is presented.  相似文献   

利用水系沉积物高程定量恢复古地貌的技术方法——以鲁西白彦地区白彦砾岩为例          下载免费PDF全文

程光锁  于学峰  杨斌  胡戈  李兆营  周军  刘卫东  罗文强  马祥县 《山东国土资源》2019,35(9)

主要分析了构造抬升对水系和地形的影响和恢复,以从古生代灰岩围岩中大面积但零星出露的岩溶砾岩点为研究对象,对区域古水系和地形地貌恢复和反演做出了新的尝试。在收集资料和实测的基础上,尝试性探讨了利用稳定水体参照物高程反演抬升高度以及邻区山峰点的古高程、古水系,恢复区域上古地形地貌的技术方法。并以白彦地区为例,通过白彦岩溶砾岩的分布、产状、金刚石矿物含量、岩性等地质特征,恢复白彦地区古地形线、古水系位置和流向等古地理地貌,指出在白彦期时代,该区总体发育4个水系,邹城市大石墙水系、枣庄水系、平邑水系、费县水系,水系中金刚石含量较为丰富的砾岩点大多分布在凤凰山隆起中心,其中在平邑水系推测存在一个山地峡谷中的古湖泊。认为蒙山凸起中已知的常马庄地区的金伯利岩脉所含有金刚石可能主要供应平邑区水系,其他3个地区水系的金刚石可能来源于凤凰山及其东部隆起剥蚀地区。  相似文献   

一种变形监测中中长基线的单历元模糊度解算算法     

温亚鑫  戴吾蛟 《大地测量与地球动力学》2019,39(9):942-946

针对已有单历元模糊度解算算法只适用于短基线的情形，根据误差传播率确定模糊度精度，依据误差确定模糊度搜索空间，提出一种利用GPS双频观测信息实现中长基线下单历元模糊度固定的算法。首先，利用电离层约束法得到双差模糊度之间的线性约束条件；其次，利用变形监测中监测站点坐标近似已知的条件进行约束，反算获得近似模糊度；最后，根据监测站点已有的观测数据精度给出搜索空间，搜索固定模糊度。结果表明，该方法可以实现中长基线下单历元的模糊度固定，对实时变形监测有一定的参考价值。  相似文献   

From soil aggregates to riverine flocs: a laboratory experiment assessing the respective effects of soil type and flow shear stress on particles characteristics          下载免费PDF全文

T. Grangeon  I. G. Droppo  C. Legout  M. Esteves 《水文研究》2014,28(13):4141-4155

Particles eroded from hillslopes and exported to rivers are recognized to be composite particles of high internal complexity. Their architecture and composition are known to influence their transport behaviour within the water column relative to discrete particles. To‐date, hillslope erosion studies consider aggregates to be stable once they are detached from the soil matrix. However, lowland rivers and estuaries studies often suggest that particle structure and dynamics are controlled by flocculation within the water column. In order to improve the understanding of particle dynamics along the continuum from hillslopes to the lowland river environment, soil particle behaviour was tested under controlled laboratory conditions. Seven flume erosion and deposition experiments, designed to simulate a natural erosive event, and five shear cell experiments were performed using three contrasting materials: two of them were poorly developed and as such can not be considered as soils, whilst the third one was a calcareous brown soil. These experiments revealed that soil aggregates were prone to disaggregation within the water column and that flocculation may affect their size distribution during transport. Large differences in effective particle size were found between soil types during the rising limb of the bed shear stress sequence. Indeed, at the maximum applied bed shear stress, the aggregated particles median diameter was found to be three times larger for the well‐developed soil than for the two others. Differences were smaller in the falling limb, suggesting that soil aggregates underwent structural changes. However, characterization of particles strength parameters showed that these changes did not fully turn soil aggregates into flocs, but rather into hybrid soil aggregate–floc particles. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

河南产宝石级高温高压合成钻石的谱学特征及电磁性研究     

杨池玉  陆太进  张健  宋中华  陈华  柯捷  何明跃 《岩矿测试》2021,(2):217-226

为快速鉴定高温高压(HPHT)合成钻石,前人已开展了系统的发光特征和谱学特征研究,但对比性分析较少,且对电学性质和磁学性质关注不多。本文结合常规宝石学观察、高精度谱学测试以及导电性和磁性测试,对49粒无色、黄色样品进行了深入研究和对比分析。结果表明:①铁、钴、镍等金属元素的触媒残余是HPHT合成钻石的磁性来源,测试样品均能被磁强达到12000Gs的磁棒吸引。②无色HPHT合成钻石为Ⅱa+Ⅱb型钻石,硼元素的存在导致其具有良好的导电能力,且随着硼含量的增多,导电能力逐渐增强;黄色样品为Ⅰb+ⅠaA型钻石,约三分之一的孤氮转化为A集合体,揭示合成钻石在生长完成后经过了高温退火处理。③硼元素的普遍存在,以及氮元素主要以孤氮原子和A集合体的方式存在,导致了HPHT合成钻石的特征红外光谱;HPHT合成钻石中常含有氮、镍、硅等杂质元素引起的晶格缺陷,导致了特征的光致发光光谱。④无色HPHT合成钻石具有强蓝绿色荧光和磷光,黄色HPHT合成钻石具有绿色荧光,可见明显的立方体-八面体分区现象。本研究表明:谱学特征和发光特征仍然是筛查鉴定HPHT合成钻石的重要依据。现生长技术下合成的HPHT合成钻石在导电性和磁性两方面也与天然钻石存在明显差异,可以作为快速鉴定合成钻石的辅助性依据。  相似文献